TM 55-2815-574-24
FIELD MAINTENANCE
ENGINE
FUEL COOLER MOUNTING BRACKET REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
General mechanic's tool kit
Engine cooling system drained (WP 0133)
(WP 0179, Table 1, Item 130)
Fuel cooler removed (WP 0081)
Materials/Parts
Lockwasher Qty: 4 (WP 0180, Table 1, Item 3)
Personnel Required
Engineer 88L
Equipment Condition
Electrical system hourmeter removed (WP 0161)
REMOVAL
1.
Remove four capscrews (Figure 1, Item 3) and lockwashers (Figure 1, Item 4) from bracket
(Figure 1, Item 2).
2.
Remove bracket (Figure 1, Item 2) from engine (Figure 1, Item 1).
END OF TASK
INSTALLATION
1.
Position bracket (Figure 1, Item 2) on engine (Figure 1, Item 1).
2.
Install four capscrews (Figure 1, Item 3) and lockwashers (Figure 1, Item 4) on
bracket (Figure 1, Item 2).
3.
Tighten capscrews (Figure 1, Item 3).
0082-1