TM 55-2815-574-24
0023
PERFORM INJECTOR CUT OUT TEST - Continued
CORRECTIVE ACTION - Continued
Figure 4. Injector Manifold.
25.
Repeat Steps 12 through 14.
26.
If there still was no noticeable change, replace injector (Figure 4, Item 1).
27.
If there was a noticeable change repeat Steps 13 and 14 for the remaining seven injectors
(Figure 4, Item 1).
NOTE
If fuel line was removed and engine was operated, Step 28 must be performed.
28.
Service lube oil system crankcase (WP 0115).
29.
Remove crankcase breather limiter assembly (WP 0106).
30.
Remove air inlet collector assembly (WP 0104).
31.
Install cylinder head poppet valve rocker cover. Contact Maintenance Supervisor.
32.
Install crankcase breather limiter assembly (WP 0106).
33.
Install air inlet collector assembly (WP 0104).
34.
Install engine hatch (TM 55-1925-205-23).
35.
Install operator`s cab (TM 55-1925-205-23).
36.
Install intake plenum assembly (TM 55-1925-205-23).
37.
Install main navigation mast (TM 55-1925-205-23).
38.
Install SINCGARS antenna (TM 11-5820-890-10-8).