TM 55-2815-574-24
FIELD MAINTENANCE
ENGINE
VIBRATION DAMPENER REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Lockwasher (WP 0180, Table 1, Item 3)
General mechanic's tool kit
(WP 0179, Table 1, Item 130)
Ring, retaining (WP 0180, Table 1, Item 17)
Chemical gloves (WP 0179, Table 1, Item 52)
Vibration dampener (WP 0180, Table 1, Item 104)
Dead blow hammer (WP 0179, Table 1, Item 59)
Industrial goggles (WP 0179, Table 1, Item 54)
Personnel Required
Universal puller kit (crossbar)
Engineer 88L
(WP 0179, Table 1, Item 99)
(
Socket wrench set, 3/4-in. drive
WP 0179, Table 1, Item 134)
References
Torque Wrench (100-600 ft lbs)
TM 55-1925-205-10
(WP 0179, Table 1, Item 139)
∙
Torque Wrench, Click, Ratcheting, in. drive,
0175 ft-lb (0237 Nm)
Equipment Condition
(WP 0179, Table 1, Item 143)
Alternator belt removed (TM 55-1925-205-23)
Materials/Parts
(
Engine lubricating oil, 10W
WP 0178, Table 1, Item 23)
NOTE
The following procedure is typical for removal and installation of crankshaft vibration
dampeners on both port and starboard engines.
0075-1