TM 55-2815-574-24
0128
INSTALLATION - Continued
14.
Tighten 12 bolts (Figure 11, Item 3).
15.
Tighten bolt (Figure 11, Item 4).
Figure 11. Oil Cooler Installation.
16.
Remove two studs (Figure 12, Item 1) from oil cooler housing (Figure 12, Item 2).
Figure 12. Studs Removal.
17.
Install four copper washers (Figure 13, Item 2) and four bolts (Figure 13, Item 3), centered on top through
cover plates (Figure 13, Item 4) and oil cooler housing (Figure 13, Item 5) into oil cooler mounting
plate (Figure 13, Item 1).
18.
Tighten four bolts (Figure 13, Item 3).