Figure 10-28.--Grinding the peripheral teeth of an end mill.
Figure 10-29.--Grinding the end teeth of a shell end mill.
the same procedure that you would use to sharpen a
possible to avoid removing the temper at the end of the
plain milling cutter except for the method of mounting
cutter. Be sure to relieve the center of the end in the same
the cutter. Mount the end mill in a universal workhead
way as on the original cutter.
(fig. 10-28) instead of between centers. You must
Generally, it will not be necessary to sharpen the
peripheral teeth. However, if you must grind them, use
remember that whenever you grind the peripheral teeth
10-18
