TM 55-2815-574-24
0032
REMOVAL - Continued
Figure 17. Marine Gear Removal.
END OF TASK
INSTALLATION
WARNING
Keep away from hanging loads, heavy parts, and overhead equipment. Never crawl under
equipment when performing maintenance unless equipment is securely blocked. Use
suitable lifting devices to move hanging loads and heavy parts. Equipment may fall. Always
use a helper to guide load. Failure to comply may result in personnel injury or death.
1.
Install marine gear (Figure 18, Item 1) on rear of engine as follows:
a.
Using crane and loop sling, position marine gear (Figure 18, Item 1) on rear of engine.
b.
Install 12 hex head capscrews (Figure 18, Item 3) and washers (Figure 18, Item 2) to secure marine
gear (Figure 18, Item 1) to the engine.
c.
Using torque wrench, torque capscrews (Figure 18, Item 3) to 55 ft-lb (75 Nm).
Figure 18. Marine Gear Installation.