TM 55-2815-574-24
0066
REMOVAL
1.
Remove two screws (Figure 1, Item 1) from balance weight (Figure 1, Item 2).
2.
Remove balance weight (Figure 1, Item 2) from drive gear (Figure 1, Item 3) and discard weight balance.
END OF TASK
INSTALLATION
1.
Align new balance weight (Figure 1, Item 2) on drive gear (Figure 1, Item 3).
2.
Install two screws (Figure 1, Item 1) in balance weight (Figure 1, Item 2).
3.
Using torque wrench and socket set, torque screws (Figure 1, Item 1) to 420 to 480 in-lb (47 to 54 Nm).
Figure 1. Balance Weight.
END OF TASK