TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
ENGINE
CAMSHAFT ACCESSORY DRIVE PULLEY REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
General mechanic's tool kit
Main navigation mast removed
(WP 0179, Table 1, Item 130)
(TM 55-1925-205-10)
Chemical gloves (WP 0179, Table 1, Item 52)
Powered section intake plenum or operator's cab
Industrial goggles (WP 0179, Table 1, Item 54)
removed (TM 55-1925-205-10)
Mechanical puller set
Powered section engine hatch removed
(WP 0179, Table 1, Item 74)
(TM 55-1925-205-23)
Socket, 3/4 in. square drive, wrench set
Fresh water cooling system drained (WP 0133)
(WP 0179, Table 1, Item 134)
Fresh water cooling system heat exchanger
Torque wrench, 100600 ft-lb (136814 Nm)
removed (WP 0134)
(WP 0179, Table 1, Item 139)
Forward lifting bracket removed (WP 0135)
Materials/Parts
(
Engine lubricating oil, 10W
WP 0178, Table 1, Item 24)
Key (WP 0180, Table 1, Item 110)
Personnel Required
Engineer 88L
Equipment Condition
Single channel ground and airborne radio system
(SINCGARS) antenna removed
(TM 11-5820-890-10-8)
0067-1