TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
ENGINE
CAMSHAFT BALANCE WEIGHT REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
General mechanic's tool kit
Main navigation mast removed
(WP 0179, Table 1, Item 130)
(TM 55-1925-205-10)
Socket, 3/8 in. square drive, wrench set
Powered section intake plenum or operator's cab
(WP 0179, Table 1, Item 135)
removed (TM 55-1925-205-10)
Torque wrench, 150750 in-lb (1785 Nm)
Powered section engine hatch removed
(WP 0179, Table 1, Item 142)
(TM 55-1925-205-23)
Fresh water cooling system drained (WP 0133)
Fresh water cooling system filter removed
Materials/Parts
Weight balance (WP 0180, Table 1, Item 76)
Fresh water cooling system heat exchanger
removed (WP 0134)
Fuel filter cartridge removed (WP 0079)
Personnel Required
Fresh water cooling system pump removed
Engineer 88L
Camshaft vibration damper removed (WP 0064)
Equipment Condition
Front balance weight cover removed (WP 0077)
Single channel ground and airborne radio system
Fresh water cooling system pump drive gear
(SINCGARS) antenna removed
removed (WP 0148)
(TM 11-5820-890-10-8)
0066-1