TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
ENGINE
FRONT BALANCE WEIGHT COVER REMOVAL AND INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
General mechanic's tool kit
Single channel ground and airborne radio system
(WP 0179, Table 1, Item 130)
(SINCGARS) antenna removed
Chemical gloves (WP 0179, Table 1, Item 52)
(TM 11-5820-890-10-8)
Industrial goggles (WP 0179, Table 1, Item 54)
Powered section intake plenum or operator's cab
Socket, 3/8-in. square drive, wrench set
removed (TM 55-1925-205-10)
(WP 0179, Table 1, Item 135)
Powered section engine hatch removed
Torque wrench, 150750 in-lb (1785 Nm)
(TM 55-1925-205-23)
(WP 0179, Table 1, Item 142)
Alternator belt guard removed
(TM 55-1925-205-23)
Engine cool to touch
Materials/Parts
Fresh water cooling system drained (WP 0133)
Cleaner (WP 0178, Table 1, Item 8)
Heat exchanger removed (WP 0134)
Gasket (WP 0180, Table 1, Item 65)
Fresh water cooling system pump removed
Lockwasher Qty: 3 (WP 0180, Table 1, Item 128)
Lockwasher Qty: 6 (WP 0180, Table 1, Item 3)
Forward lifting bracket removed (WP 0135)
Marker tags (WP 0178, Table 1, Item 35)
Personnel Required
Engineer 88L
Equipment Condition
Main navigation mast removed
(TM 55-1925-205-10)
0077-1