TM 55-2815-574-24
FIELD MAINTENANCE
ENGINE
FUEL SYSTEM PRIMING
INITIAL SETUP:
Tools and Special Tools
Personnel Required
General mechanic's tool kit
Engineer 88L
(WP 0179, Table 1, Item 130)
Chemical gloves (WP 0179, Table 1, Item 52)
References
Drain pan (WP 0179, Table 1, Item 87)
TM 55-1925-205-10
Industrial goggles (WP 0179, Table 1, Item 54)
Equipment Condition
Materials/Parts
Engine cool to touch
Hazardous material spill clean-up kit
(WP 0178, Table 1, Item 33)
FUEL SYSTEM PRIMING
1.
Position drain pan under fuel return line (Figure 1, Item 1).
WARNING
Do not allow any oil/fuel to drip onto deck. Failure to comply may result in
personnel injury.
Accidental or intentional introduction of liquid contaminants into the environment
may result in a violation of state, federal, and military regulations. Refer to local
environmental office for information concerning storage, use, and disposal of
these liquids. Failure to comply may cause damage to environment and health
of personnel. Seek medical attention in the event of injury.
2.
Disconnect fuel return line (Figure 1, Item 1) from fitting (Figure 1, Item 2).
Figure 1. Fuel Line Removal.