TM 55-2815-574-24
0111
DISASSEMBLE - Continued
Figure 4.
a.
Remove two fillister head screws (Figure 4, Item 6) securing rear end plate (Figure 4, Item 4) to
blower housing (Figure 4, Item 3).
b.
Back out the center screws of both pullers (Figure 4, Item 5).
c.
Position both pullers (Figure 4, Item 5) on rear end plate (Figure 4, Item 4).
CAUTION
Ensure the six 1/4 in. x 20 in. x 1 1/4 in. bolts are threaded all the way into end plate to
provide maximum anchorage for the pullers to eliminate possible damage to the
blower end plate.
d.
Secure pullers (Figure 4, Item 5) to end plate (Figure 4, Item 4) with six 1/4 in. X 20 X 1 1/4 in. bolts.
e.
Rotate two pullers simultaneously clockwise and remove rear end plate (Figure 4, Item 5) from blower
housing (Figure 4, Item 3).
f.
Remove pullers (Figure 4, Item 5) from rear end plate (Figure 4, Item 4).
12.
Remove front end plate (Figure 5, Item 2) from blower housing (Figure 5, Item 1).