TM 55-2815-574-24
FIELD MAINTENANCE
ENGINE
TURBOCHARGER REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
General mechanic's tool kit
TM 55-1925-205-10
(WP 0179, Table 1, Item 130)
Air filtering respirator (WP 0179, Table 1, Item 109)
Equipment Condition
Chemical gloves (WP 0179, Table 1, Item 52)
Engine cool to touch
Drain pan (WP 0179, Table 1, Item 87)
Fresh water cooling system drained (WP 0133)
Industrial goggles (WP 0179, Table 1, Item 54)
Single channel ground and airborne radio system
Utility apron (WP 0179, Table 1, Item 8)
(SINCGARS) antenna removed
(TM 11-5820-890-10-8)
Materials/Parts
Main navigation mast removed
Gasket (WP 0180, Table 1, Item 100)
(TM 55-1925-205-23)
Gasket (WP 0180, Table 1, Item 79)
Operator's cab removed (TM 55-1925-205-23)
Hazardous material spill clean-up kit
Intake plenum removed (TM 55-1925-205-23)
(WP 0178, Table 1, Item 34)
Engine hatch removed (TM 55-1925-205-23)
Turbo installation kit
Crankcase breather limiter assembly removed
(WP 0180, Table 1, Item 7)
Air intake housing removed (WP 0103)
Air inlet collector assembly removed (WP 0104)
Personnel Required
Engineer 88L
NOTE
This task is typical for both port and starboard turbochargers on port and starboard power
modules.
0114-1