TM 55-2815-574-24
0127
INSTALLATION - Continued
Figure 2. Oil Pan Gasket.
5.
Align holes in oil pan (Figure 1, Item 3) with holes in engine block (Figure 1, Item 6) and position oil pan with
gasket on engine block.
CAUTION
Do not overtighten oil pan bolts. Failure to comply could damage oil pan and gasket.
6.
Install 24 new lockwashers (Figure 1, Item 2) onto oil pan bolts (Figure 1, Item 1).
7.
Apply adhesive to threads of oil pan bolts (Figure 1, Item 1) and install center bolt on each side of oil pan
(Figure 1, Item 3).
8.
Continue installing remaining bolts (Figure 1, Item 1), alternately, on either side of pan (Figure 1, Item 3)
working toward each end of oil pan.
9.
Using torque wrench, torque bolts (Figure 1, Item 1) to 10 to 20 ft-lb (14 to 27 Nm) , working from center
and alternating sides, towards each end of oil pan (Figure 1, Item 3).
10.
Coat threads of drain plug (Figure 1, Item 4) with adhesive.
11.
Install drain plug (Figure 1, Item 4) into new oil pan (Figure 1, Item 3).
12.
Using torque wrench, torque drain plug (Figure 1, Item 4) to 25 to 35 ft-lb (34 to 47 Nm).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
2.
3.
4.
5.
Install air box drains (TM 55-1925-205-10).
6.
7.