TM 55-2815-574-24
FIELD MAINTENANCE
ENGINE
LUBE OIL COOLER REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
General mechanic's tool kit
Marker tags, with metal eyelet patch Qty: 2
(WP 0179, Table 1, Item 130)
(WP 0178, Table 1, Item 36)
8-1/2 in. long, 5/16 in. 18 thread stud Qty: 2
Seal (WP 0180, Table 1, Item 31)
(WP 0179, Table 1, Item 58)
Air filtering respirator (WP 0179, Table 1, Item 109)
Personnel Required
Chemical gloves (WP 0179, Table 1, Item 52)
Engineer 88L
Drain pan (WP 0179, Table 1, Item 87)
Industrial goggles (WP 0179, Table 1, Item 54)
Utility apron (WP 0179, Table 1, Item 8)
References
FM 4-01.502
TM 55-1925-205-10
Materials/Parts
Cleaner (WP 0178, Table 1, Item 8)
Cleaning cloth (WP 0178, Table 1, Item 13)
(
Engine lubricating oil 10W
Equipment Condition
WP 0178, Table 1, Item 24)
Marine gear oil cooler removed
Gasket (WP 0180, Table 1, Item 45)
(TM 55-1925-319-23)
Gasket Qty: 2 (WP 0180, Table 1, Item 10)
Marine gear oil cooler mounting bracket removed
Gasket Qty: 2 (WP 0180, Table 1, Item 9)
Gasket Qty: 2 (WP 0180, Table 1, Item 95)
Overspeed governor removed
(
Hazardous material spill clean-up kit
(Contact Maintenance Supervisor)
WP 0178, Table 1, Item 34)
Engine cool to touch
Lockwasher Qty: 12 (WP 0180, Table 1, Item
Propulsion module ventilated
106)
(TM 55-1925-205-23)
NOTE
This procedures is typical for port and starboard engines.
0128-1