TM 55-2815-574-24
0056
REPAIR - Continued
5.
Using machinists rule, check thickness of valve (Figure 2, Item 1) edge. Thickness should be
0.031 in. (0.0787 cm).
6.
Using outside micrometer, check diameter of valve stem (Figure 1, Item 5). Diameter should be
0.3100 to 0.3108 in. (0.7874 to 0.7894 cm). Repair or replace damaged parts.
7.
Using machinist ruler, check width of valve (Figure 2, Item 1) face. Width should be 0.046 to 0.093 in.
(0.1168 to 0.2362 cm). Repair or replace damaged parts.
8.
Dispose of contaminated cloths in accordance with local procedures.
END OF TASK
END OF WORK PACKAGE
0056-4