TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
ENGINE
LUBE OIL PRESSURE REGULATOR VALVE REMOVAL AND INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
General mechanic's tool kit
Air inlet collector assembly removed (WP 0104)
(WP 0179, Table 1, Item 130)
Turbochargers removed (WP 0114)
Socket, 3/8 in. square drive, wrench set
Exhaust manifolds removed (WP 0157)
(WP 0179, Table 1, Item 135)
Marine gear oil cooler removed
Torque wrench, 150750 in-lb (1785 Nm)
(TM 55-2040-211-24)
(WP 0179, Table 1, Item 142)
Fuel cooler removed (WP 0081)
Air box covers removed (WP 0036)
Air box drains removed (TM 55-1925-205-23)
Materials/Parts
Starting motor removed (WP 0164)
Gasket (WP 0180, Table 1, Item 43)
Lube oil level dipstick tube removed (WP 0130)
Overspeed governor removed (WP 0169)
Marine gear oil cooler mounting bracket removed
Personnel Required
Engineer 88L
Lube oil cooler removed (WP 0128)
Engine mounted on stand (WP 0033)
Equipment Condition
Lube oil pan removed (WP 0127)
Crankcase breather limiter assembly removed
0123-1