TM 55-2815-574-24
SUSTAINMENT MAINTENANCE
ENGINE
LUBE OIL SYSTEM DISTRIBUTION COMPONENTS REMOVAL, CLEANING, INSPECTION, AND
INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
General mechanic's tool kit
Air inlet collector assembly removed (WP 0104)
(WP 0179, Table 1, Item 130)
Turbochargers removed (WP 0114)
Chemical gloves (WP 0179, Table 1, Item 52)
Exhaust manifolds removed (WP 0157)
Industrial goggles (WP 0179, Table 1, Item 54)
Marine gear oil cooler removed
Socket wrench set (3/8 in. sqdr.)
(TM 55-2040-211-24)
(WP 0179, Table 1, Item 135)
Fuel cooler removed (WP 0110)
Torque wrench, 150750 in-lb (1785 Nm)
Air box covers removed (WP 0036)
(WP 0179, Table 1, Item 142)
Air box drains removed (WP 0037)
Starting motor removed (WP 0164)
Lube oil level dipstick tube assembly removed
Materials/Parts
Cleaner (WP 0178, Table 1, Item 8)
Overspeed governor removed (WP 0169)
Cleaning cloth (WP 0178, Table 1, Item 13)
Marine gear oil cooler mounting bracket removed
Gasket (WP 0180, Table 1, Item 101)
Gasket (WP 0180, Table 1, Item 76)
Lube oil cooler removed (WP 0128)
Lockwasher Qty: 2 (WP 0180, Table 1, Item 2)
Engine mounted on stand (WP 0033)
Lube oil pan removed (WP 0127)
Personnel Required
Engineer 88L
References
TM 55-1945-205-24P
Equipment Condition
Crankcase breather limiter assembly removed
WARNING
Fuel/Oil may cause irritation to eyes or skin. Wear protective goggles, gloves, and clothing.
Failure to comply may result in personnel injury or death.
0122-1